■ Power range: 5kW/10kW/15kW in 3U, high power density design
■ Multiple devices power up to 75kW in cascade mode
■ Voltage range: 60V/100V/150V/300V/450V/600V/800V/1000V
■ Multiple protections: OCP, OVP, UVP, OTP, OPP, open phase protection and monitoring mode
■ Programmable sequence (SEQ) test function, up to 100 sequence files, up to 100 steps per file
■ Analog programming (APG) interface, current monitoring interface, remote trigger function to realize complex function control and monitoring
■ CC, CV and CP operation mode
■ Editable rise/fall slew rate
■ LCD screen for data display
■ Communication interfaces: LAN/RS232
■ Standard 19-inch 3U, available for rack installation
■ External dissipater to protect the power supply and DUT
The operation mode includes CV, CC and CP mode
Note: CP mode is mainly used for load with response speed at least 10ms
Master/slave design, convenient for power expansion
N3300 can be used independently or in master/slave parallel operation. It has built-in master/slave mode, and the Max.power can be expanded to 75kW. It adopts a unique current sharing design to ensure each module shares the load equally and ensure the consistency of product use.
N3300 provides a number of external interfaces, including voltage/current monitoring output, voltage/current programming input, power control input signal, and four TTL output signals, etc. Standard communication interfaces are LAN and RS232.
Voltage rise and fall waveform
Voltage & current monitoring
The voltage/current monitoring output interface outputs 0-reference voltage, corresponding to 0-full scale. An electric meter or oscilloscope can be connected externally to monitor the voltage/current variation.