N39436-60-15 (360W/60V/15A) is recommended. It is a wide range four-channel DC power supply with dual LAN ports.

1) Reduces space occupation.

2) Saves purchase cost.

3) Shortens test time.

4) Enhances test safety.

5) Provides repeatable test results.

The programmable electronic load can be used to test fuel cells, power supplies, DC-DC converters, batteries, chargers, adapters, automobile wiring harness, automobile connectors, etc.

A DC electronic load is an instrument that consumes electrical energy by controlling the internal power or the conductance of transistor and relying on the power dissipation of power tube.

In constant voltage mode, the power supply operates as a voltage source which keeps the voltage constant while output current changes, according to different load conditions.

Line regulation is defined as the ability of the power supply to provide a stable output voltage when the input voltage changes.

In constant current mode, the power supply operates as a current source which keeps the current constant while output voltage changes, according to different load conditions.

Battery simulator is a programmable electronic equipment which emulates the properties of real batteries. The simulator provides voltage, current and power required in the same way as a true battery. 

Load regulation is the ability to maintain a stable output voltage of the power supply despite changes in the supply's load.

Linear power supplies take an AC input, step down the voltage via a transformer, then rectify and filter the input into a direct current output.

Switching power supplies take an AC input, but rectifies and filters into DC first.  Next this DC power is switched to a higher frequency through a switching circuit. It steps down the voltage with a transformer, then is rectified and filtered into a DC output. 

1) Reduces the efficiency of power supply.

2) Noise interference will cause instability of audio and video.

3) It will increase the heating and reduce the lifetime.

4) Interferes with the logic circuit and affect the normal operation of circuit.

Temperature coefficient describes the relative change of a physical property which is associated with temperature variation.

Slew rate is defined as the rate of voltage or current change per unit time.

Transient recovery time is a duration required for the power supply to recover to its specified level after loading.

Please repair the fan or replace it with a new fan.

The chip is burned out. Please change a new chip.

Please restart N8331, add the new IP on application software and click Online.

The DVM register is not switched on when configuring parameters.

It can transmit 100M bits per second bidirectionally. The actual effective load is less than 100M bits.

N8330 series, N8340 series and N83624 series.

N8330 series, N83624 series, N8352 series and N8358 series.

N8330.

N8352 supports colorful touch screen, DVM function and bidirectional current.

Digital voltmeter.

It can save energy and provide convenient thermal management.

Regenerative load is more energy-saving than energy-consumed load.

The module has over temperature fault.

OTP stands for over temperature protection.

R&D, production, aging and QC of power supply, charger, battery pack, BMS, charging station and supercapacitor.